Product
Combined Catalyst System_AMP-2K-1-BET-201A-PYC-G100A
PMI AUTOMATED - Combined Catalyst System BET/ Porosimeter/ Helium Pycnometer (All in one system) / AMP-2K-1-BET-201A-PYC-G100A
Sorptometer
| Accuracy: | At least ± 5% |
| Sample Holder: | Capacity More than 5ml |
| Surface Area Range: | 0.1 m² and higher |
| Reproducibility: | At least ± 5% |
| Operating Temperature: | 15°C - 40°C |
| Regeneration System Heater Temperature Range: | Ambient to 300°C |
| Accuracy: | ± 5% |
| Standards: | The equipment confirms to: ASTM D-3037 |
Porosimeter
| Pore Size Range: | 0.01-400 microns or wider |
| Pressure increment mode: | Step and continuous |
| Sample Chamber Sizes: | 1” diameter & 1” Tall sample chambers tested up to 2,000PSI |
| Accuracy: | ±1% of full scale or better of intrusion volume, ±0.1mm_ resolution |
| Pressure Range: | Vacuum to 2,000 psi |
| Pressure Transducer Range: | 0 - 2,000 psi |
| Pressure Transducer Accuracy: | ±0.15% |
| Transducer Hysteresis: | ±0.10% |
| Resolution: | 1 in 2,000 |
| Power Requirements: | 220 VAC, 50/60 Hz (Others available) |
Pycnometer
| Sample size: | 100 cc standard, other sample size are available |
| Pressure: | 15 psi |
| Accuracy: | at least 0.1 % |
| Resolution: | 1 in 60,000 |
| Repeatability: | up to 0.1 % |
| Power Requirements: | 220 VAC, 50-60 Hz |
Porosimeter
- Windows-based software handles all control, measurement, data collection, and report generation; manual control also possible
- Unlimited user-defined data points based on pressure, volume, or a combination
- Displays both intrusion and extrusion curve
- Real-time graphical test display shows testing status and results throughout operation
- Minimal maintenance required
- Automatic mercury refill and clean up
- Pressure generator features continuous and stepwise scanning
Pycnometer
- Conforms to EN 15150 Standards
- Automated Control
- Non-destructive measurement
- Stainless steel embodiment
- Fully automated and simple to use
- Highly reproducible & accurate results
- Low required pressures; works with compressed air
- No need for liquid nitrogen
- Mercury-free, non-toxic wetting liquids reduces disposal related costs
- Compatible PC & software to be supplied along with the machine
- Samples are conditioned to remove any trapped air and contaminants
- Option to purge by a suitable method
- Pore Structure Characteristics:
- Mean Pore Size
- Pore Size Distribution
- Total Pore Volume
- Single Point Surface Area
- Multi-Point Surface Area
- Adsorption & Desorption Isotherms
related products
browse similar products here and make the best decision based on your requirements
Are You Satisfied With The High Quality Products & testing services offered by PMI ?
